If you’re a Firestick owner, you’ve probably noticed that your remote doesn’t always work properly. Whether it’s a battery problem, an update glitch or something else entirely, it can be frustrating to have a remote that doesn’t follow your commands.
The good news is that there are a number of ways to fix this issue, and most of them are fairly easy to perform. Here are a few of the most common reasons that your Firestick remote might not be working:
1.) Batteries aren’t fresh. If your Firestick remote is using alkaline batteries, you might want to replace them. Rechargeable batteries provide only 1.2V, while alkaline ones provide 1.5V.
2.) There’s a distance issue. Bluetooth devices such as the Firestick remote have a theoretical range of about 30 feet, but that range can be reduced by obstructions like wires.
If you’re having trouble with your remote, try unpairing it and pairing it again. This can help remove any saved Bluetooth devices that may be causing interference or other issues with your remote.
How Do I Fix an Unresponsive Firestick Remote?
If your Firestick Remote isn’t working, it’s likely due to a problem with the device itself. In most cases, the problem is easy to fix.
First, check that the batteries are inserted properly and that they’re not in any way damaged or broken. If they are, you’ll need to replace them with fresh batteries.
Alternatively, you can try resetting your Fire Stick to see if that fixes the issue. This can be done by holding down the Home and Back buttons on your remote simultaneously for 10 seconds.
Another common cause of remote problems is Bluetooth interference. This can be caused by microwaves, wireless devices, and unshielded coaxial cables that have Bluetooth enabled.
The best way to rule out these issues is to remove or shut down any Bluetooth-enabled devices that may be nearby and test the Fire Stick to see if it works again. If the device is still unresponsive, it’s time to contact Amazon for a replacement.
How Do I Restart My Firestick Remote?
When your Firestick or Fire TV stick becomes unresponsive, it can be useful to restart the device. This will force the operating system to reset and clean up any on-going processes.
You can do this by pressing and holding a combination of buttons on your remote controller. This is a hard reboot that closes any running apps.
Restarting your Firestick or Fire TV can be a helpful fix for issues such as performance problems, lagging, and errors. You can also use it to fix an overheated device.
There are several different ways to restart your Firestick or Fire TV, but the easiest way is to power cycle it. This will restart your device by reconnecting it to its power source. This is a quick and easy method that can be done in just a few seconds.
Why Do Remotes Suddenly Stop Working?
Remotes that suddenly stop working can be a frustrating thing to deal with. There are many reasons why this can happen, including battery issues, pairing problems, and more.
Batteries: The first issue to check for is if the batteries in your Fire Stick remote are still functional. They need to be fresh and strong for the Alexa-enabled device to work properly, so it’s important that you only use high-quality batteries.
If the batteries aren’t working, you might need to install new ones. Remove the old ones from your remote and replace them with fresh batteries, making sure to insert them in the right direction.
Another common reason that remotes suddenly stop working is if the terminals in the buttons have corrosion. This can cause the remote to lose its ability to receive power from the batteries, so cleaning it is a good idea. You can use a cotton swab or toothbrush to wipe off the corrosion. Once the corrosion is gone, the remote should work again.
What to Do If Your Remote Stops Working?
If you’re having issues with your remote, there are a few things that you can do. One of the most common problems is a battery issue.
Fire Stick and Fire TV remotes are power hungry, so they can run through batteries a lot faster than you might expect. Replacing your batteries can help.
Another thing you can try is resetting your device. This will not only refresh your connection, but also restart the remote’s internal software and hardware.
To do this, unplug your Firestick from the back of your television and wait a few seconds before plugging it back in again. This can often resolve the problem, and will also reset your Firestick’s firmware to its original state.
You may also need to pair your remote again, which can be done by moving your remote close to your television and pressing the Back and Home buttons. This process can take several attempts, but it should get the remote working again.
How Do I Pair My Amazon Fire Stick Remote?
If you’ve lost or misplaced your original Fire Stick remote, you can pair another one using the settings menus. The process is simple, but it will take a bit of time for the new remote to be paired with your Fire TV.
Before you start, make sure your remote has fresh batteries installed. Then, press and hold the Home button on the remote for about 10 seconds. This should cause a light to flash rapidly on the top of the remote, and it will show a confirmation message or flash blue three times when you’ve successfully paired your new remote.
When your remote is paired, it will automatically control the power and volume on your TV, which is a handy feature if you don’t have a traditional remote for your television. You can also use it to switch the Fire Stick input on your TV by activating HDMI-CEC, which is available on most recent generation TVs.
You can also use the Fire TV remote app on your mobile phone or tablet to control your TV. This is great for those who don’t have a traditional remote, and it allows you to use Alexa.
How Can I Reset My Remote Control?
There are a lot of things that can cause your remote to stop working. Oftentimes, it’s a simple matter of changing the batteries. But if that doesn’t fix your problem, you might need to reset it.
Depending on your model, there are different resetting commands you can use to get your remote back to working order. Here are a few of the most common:
The first step is to remove your Firestick from its TV and unplug it. Then, press and hold the Left, Menu, and Back buttons for 12 seconds.
Once this is done, plug the Firestick back in and wait for it to boot up. Then, you’ll be able to pair your remote with it.
The instructions for resetting your Fire Stick remote don’t change too much between remote models, but there is one key difference: You’ll need to press the Left and Menu buttons as well as the Back button during step two.
How Do You Know If Your Remote is Broken?
If you’re having trouble getting your Firestick remote to work, it might be time to replace it. But before you do, there are a few things you can do to determine if your remote is broken.
First, test to see if the IR LEDs on your remote are working properly by viewing them through a phone or digital camera. If you can see a blue light coming from the LEDs, they’re likely sending signals to the TV.
Then, check your remote’s batteries. You should use fresh batteries every time you use the remote.
Another option is to get a keypad repair kit that can fix your remote’s keypad. These kits come with brushes and cleaning fluid, and they usually cost around $20 or $30.
Finally, if you have an Alexa-enabled Fire Stick, make sure it’s not being affected by Bluetooth interference by moving any wireless devices in the area. Bluetooth remotes are vulnerable to interference and may not be able to work as well.
Learn More Here: