Skip to Content

What Is The Reason I Have Two White Spots Circles On A Samsung TV?

Is your TV showing two white spots circles? This is a common problem that can be resolved by replacing the screen. This problem is usually difficult to detect but can be solved by following the steps mentioned below: Turn off the daydream mode or screen saver, manually set the time, and set the TV to sleep mode. Sometimes the problem is not a physical fault, but it could be a technical one.

Pressure marks on TVs are caused by a malfunctioning processor. When handling the TV, it is important to keep your fingers away from the display. Do not push or pull the screen, as this can cause damage to the display matrix. In rare cases, stuck pixels may cause the white spots on the TV. Dead pixels are ones that do not light at all and are permanently turned off. In most cases, these spots will not affect the viewing experience, but they are still a problem.

The most likely cause of this problem is the LED TV screen. The LED screen contains many small pixels which radiate light to create the picture. If some of them are damaged or dead, it will appear on the screen as white spots. Luckily, this problem can be resolved by replacing the screen. If this doesn’t work, you may need to replace the screen altogether. If you have a new TV, you can replace the screen and try again.

How Do I Get Rid Of Symbols On My Sony TV?

How do I get rid of symbols on my television? Some Sony TVs have a display bar, which shows icons of features. These appear randomly on the screen and cannot be selected. This is a problem with the TV’s mute button, which you can use to hide these ads. This article will show you how to disable the e-POPs on your Sony TV.

Firstly, look for the model number on your Sony TV. Some models were released in 2012, but are still manufactured in 2019. For example, if your TV has a model number starting with a letter J, then it was manufactured in the second quarter of that year. You can find the model number in the system information menu by going to Settings / About TV > About TV. After this, you can remove the symbols from your TV.

READ ALSO:  How Can I Get Hbo Max on My Samsung TV?

To disable the i+ icon, go to the settings on your remote. Select the “i+” icon in the mode selector. Then, you need to disable the Featured Apps bar by choosing “Focus” or “Disable”. To avoid the nagging messages from these promoted apps, you need to turn off the notifications from these apps. It might take some time for this, but it’s worth a shot.

How Do You Fix A Stuck Boot On A Sony TV?

The first step you must take to resolve the stuck boot is to restart the TV. This is easier said than done, but it can often clear the bugs on your television. If the TV is on the first level, you may need to turn it off and on again to restore the default settings. Otherwise, you might need to install a firmware update on your TV. It is available for download on the official Sony website.

Next, you need to power off your TV. Unplug the television and hold the power button for 20 seconds. Then, you should see a white LED light on the device. Now, you need to plug it back in. It will then start up the welcome or setup screen, where you can choose your preferred settings. If this step fails, the next step is to remove the USB and then reattach it.

If all else fails, try resetting the TV. Make sure you disconnect any external USB hard drives before you reset the device. Afterwards, the TV should restart automatically. Press the POWER button on the remote control to turn it back on. It will automatically reboot after a minute. Once the device is back to normal, you can turn it on again. You may want to keep an extra power cord connected to the TV in order to continue watching shows.

How Do I Factory Reset My Sony TV?

How do I factory reset my Sony TV? This procedure is helpful for resetting the television when something is wrong with it. If the picture isn’t showing on the screen, the remote control isn’t working, or the screen is unresponsive, you can use this method to restore your TV to its original state. Just remember that this procedure will wipe all data from your TV. Make sure to disconnect your external USB devices before performing the process.

READ ALSO:  How to Watch Roku on Samsung Smart TV?

To perform a factory data reset, you first need to unplug your Sony TV from all other devices. This includes the HDMI connection device and an external hard disk drive. When your TV is working properly, you can remove the devices that are connected to it. Otherwise, you can reconnect them one at a time. Once you have disconnected everything, you can now perform a factory data reset. To do this, simply press the power button on your TV and then hold the down button for 30 seconds. After 30 seconds, you can release the buttons. The TV will reboot and go through a reset cycle. When the process has finished, you will be faced with the original Welcome screen.

To perform a factory data reset, you should make sure to disconnect your USB hard drive and the TV itself. You should also turn the TV on before you perform this process. After about a minute, the TV should automatically restart. If it doesn’t, simply press the POWER button on the remote control to turn it on. If the TV is still not turning on, try restarting it. You should notice that it has rebooted and is running faster. After the factory data reset, you can now watch movies and TV shows on your new TV.

How Do You Turn Off The Banners On The Sony Bravia TV?

You can disable the information banner on your Sony Bravia TV by using the “Menu” or “+” buttons. This will display a menu containing options that you can select. Alternatively, you can choose the “Demo Mode” option, which allows you to skip the information banners. Press the “+” or ‘-” buttons to cycle through the different options, or use the navigation bar at the bottom of the screen to go to the next option.

To turn off the banners, you need to go into the Settings of your television. From the Settings page, you can choose whether to hide or unhijack the banners. If you want to turn off the text on your television screen, you can also switch off closed captions by selecting the “Closed caption” option from the menu. Alternatively, you can simply use the remote’s menu button to access the “Demo” setting.

READ ALSO:  How to Watch Nba on Samsung TV Plus?

If the menu appears frozen, you can try to reset it manually. This is a helpful method if you cannot turn off the banners. It may be the reason why your menu is frozen. For this purpose, you need to enable the DEMO mode. To do so, press the home button or power button on your remote control and select “DEMO” mode. You’ll be prompted to choose the language of the menu.

How Do I Remove Icons From My TV Screen?

You may have noticed a pop-up menu on your TV screen. The icons for the features of your TV are displayed here. The icons keep appearing in random spots on the screen, so you can’t simply select them. If you’d like to remove these icons from your TV, you can follow these steps. Then, simply press the mute button on your television. Finally, drag the icon to where you want it to appear.

First, power up your smart TV. On the home screen, press the little house icon to access the menu. On the right side, select the “Apps” option. On the left side of the menu, choose “Apps.” Tap the menu item “Apps” and then tap on the app you want to remove. Click the grayed-out X that appears over the icon. This will remove the app from your TV.

To remove YouTube and other apps, open the “settings” app. In the Google Play store, select “My Apps” and then press the x to close it. Then, go back to your smart TV and search for the YouTube icon. You should see the icon on the screen you’d like to remove, and then hit the X. Using the arrow keys, swipe left and right to reorder the icons.

Learn More Here:

1.) Samsung TV Website

2.) Samsung TV – Wikipedia

3.) Apps for Samsung TV

4.) Smart TV Buying Guide