Skip to Content

How To Remove Mophie Case iPhone 6?

If you are unsure of how to remove the Mophie case from your iPhone 6, you’ve come to the right place. The battery case has two sections. One part has a small tab that you can pry out with your fingernail. The other part is attached to the charging port of your iPhone. Once you have removed the battery case, you can remove the case from the iPhone. The following steps will guide you through this process.

First, remove the Mophie case from your iPhone 6. You can either slide it out or unscrew the case. The latter allows you to slide the phone out of the bottom portion of the case. The Mophie case has a horizontal line across the back that runs about a quarter of the way down. If you’re looking for more detailed instructions, the Mophie website contains a comprehensive guide.

How Do You Take Off A Mophie Case?

A case can be removed from the iPhone 6 by following a simple process. The process for taking off a battery case is different from that for charging. In this guide, you’ll learn how to take off a Mophie Juice Box Pro case, as an example. The Mophie Juice Box Pro case has a small tab at the bottom, which you can pry off with your fingernail. During this step, you’ll see a battery indicator light and a button that connects to the iPhone’s charging port and USB port.

In order to remove a Mophie case from your iPhone 6, you first need to remove the battery. Start by gripping the case with your left hand, and the bottom with your right. The crease between your thumb and forefinger is where you should grasp the case. This vertical grip will make it easier to lift the case off, but be sure to grip it firmly so that you do not damage the phone’s battery.

How Do You Get A iPhone Charger Case Off?

If you have an iPhone that has a charging case that prevents you from being able to use your phone, you may be wondering how to remove it. There are a few different ways to remove it. One method involves a hairdryer. This method can help you remove the case easily, and you can also use a solvent to dissolve the adhesive. This method is particularly effective for iPhones that do not have a charging port.

READ ALSO:  Can I Connect My Apple TV to Alexa?

If your case has become loose, try removing it one piece at a time and applying pressure to the charging button. Once you’ve done that, you should be able to gently pull the case off and start charging your phone again. This method is not as safe as removing the charging case completely, but it does work. There’s no need to remove the charging case when using a wireless charger.

How Do I Take Off My iPhone 6 Case?

In order to get the best out of a Mophie iPhone 6 case, you have to be able to take off the top section of the case. Once you have removed the top section, slide the iPhone out. You will then notice a horizontal line running along the back of the case about a quarter of the way down. This line should be the same length as the bottom section. Using this tip will help you remove the case with ease.

To do this, you will need to locate the battery indicator lights on the bottom of the case. Then, you can pull a small tab up with your fingernail. You can also download a manual for the Mophie iPhone 6 case on wikiHow, an online encyclopedia that is curated by volunteers. This article has been viewed 50,386 times. If you’d like a manual for another phone, you can download it from Mophie’s website.

How Do You Remove A Battery Case?

The battery case of an iPhone 6 is held on by double-sided adhesive. To remove it, you must scrape it up from underneath. Be careful though, because the adhesive is black and rips easily. If you do manage to scrape it off, you can use tweezers to fix the adhesive. Then, gently pull up the battery case until it is free from the phone.

To remove the battery case, separate the screen from the body. Next, unscrew the battery bracket and connectors from the body of the device. The EMI shield is located on the bottom right corner. It’s secured to the logic board with two screws. Once you’ve detached the two screws, use the spudger to disconnect the battery cable from the logic board. The battery case is then free from the iPhone.

READ ALSO:  Can I Download Apps on Apple TV 3?

The battery is held down with 3M Command Strip-esque adhesive. Unlike its predecessor, this adhesive can damage the phone if you accidentally puncture it. But don’t worry, this process doesn’t have to be scary. All you need are a few tools and some patience. Just remember to follow a clear sequence to avoid damaging the motherboard. It’s also important to keep the screws in the proper locations.

Can You Reset A Mophie Case?

When you purchase a Mophie case for your iPhone, you may be wondering how to reset it. Luckily, this process is simple. First, you will need to remove the Mophie case. To do this, follow these steps:

To charge the Mophie, you will need to plug it into a standard USB port or a micro USB port. Once connected, you will see a progress bar that will tell you how much battery life you have left. When you’re ready to use the Mophie, you can attach the battery. You can check the battery level from the battery status button or quick settings. The notification will be near the bottom of your notification list. To see general battery settings, simply touch it.

How Do You Reset A Mophie Charger Case?

You need to know how to reset the Mophie charger case on an iPhone 6 in order to use it for backup battery or charging purposes. To do this, you should press the silver button on the back of the case to reset it. It should work again if you follow the steps listed below. Alternatively, you can also use the USB port on your iPhone to connect the Mophie case.

You can also restart the phone if you don’t have the case on. To do this, you have to locate the small hole in the case. The battery will start charging after a few seconds after you press the switch. Moreover, you should be able to feel the button in the back case. After you’ve done this, you should be able to turn on the device.

READ ALSO:  Is Sling TV on Apple TV?

Then, you can use the 3.5mm extension cable to connect the iPhone to the Mophie. This cable will work for the iPhone 6 and the older iPhone models. But the next generation should have a 3.5mm socket on the outside. The case may cause different problems depending on the way the phone is used. However, if you follow the steps outlined above, you should be able to reset the Mophie charger case on your iPhone 6 without any problems.

Why Is My Mophie Charging Case Not Working?

If your Mophie charging case isn’t working on your iPhone 6, the problem is likely with your charging cable. The Mophie case has a micro USB charging port, which prioritizes charging over your phone. While it does support pass-through syncing, it also has a recessed port hole for the 3.5mm headphone jack. While it won’t fit wide connectors, you can purchase an adapter to fit your device.

The Mophie Juice Pack Plus has a built-in light sensor that monitors charging status. Its rugged rubber design protects your phone from bumps and impacts. If your Mophie charging case is not working, here’s how to fix it. First, turn off your iPhone. Next, remove the battery case. Remove the batteries and plug them into your iPhone’s Lightning connector.

If you don’t have the wireless charging cable, you can try purchasing a wireless charger from a store like Starbucks. You’ll also need a Qi-compliant charger. You can also use a wireless charger that’s made for your iPhone 6 or 6s. Just make sure to buy a case that is compatible with your device. If you have an iPhone 6 or 6s, you can purchase a wireless Mophie charger. The Aircharge wireless charger, on the other hand, is $32.

Learn More Here:

1.) Apple Website

2.) iPhone – Wikipedia

3.) iPhone models

4.) iPhone wiki