Skip to Content

How to Change the Battery in My Apple TV Remote?

If you are having trouble using your Apple TV remote, or if it is simply starting to run down, you may want to consider replacing its battery. Changing your battery is easy, and will help ensure that your remote can function properly.

First, you’ll need to check your remote for any batteries. You’ll find batteries on the bottom of some remotes, but not all. For most remotes, you can just open the lid and check the charge level.

In general, a rechargeable battery should last for about two months. If you don’t have a charger on hand, you can plug the remote into a computer to reload its battery. The CR2032 lithium 3V coin battery is commonly available in most drugstores and electronics stores.

Second, you’ll need to unscrew the top of the remote. Then, you can slide out the battery tray. It can be a little tricky, but it is possible. To get the tray out, use a small nail, a spoon, a paper clip, or a metal toothpick.

Third, you can remove the battery. Removing the battery will require a bit of force, but it’s also one of the quickest ways to get the job done.

Can You Replace Battery in Apple TV Remote?

The Apple TV remote uses a lithium 3V coin battery to power up the device. However, these batteries do not last long. They need to be replaced.

To replace the battery on the remote, you will need to remove the battery cover. This is not as difficult as it sounds. You can use a pair of thin tweezers or a screwdriver.

Once you have removed the cover, you need to open the remote’s battery compartment. The battery compartment is located underneath the directional pad and main control buttons. It may be opened by a metal toothpick or a spoon.

Before you start to replace the battery, check the remote’s charging status. If the battery is dead, you will need to plug it into a wall outlet. A quick search online should provide some information.

READ ALSO:  How To Unlock iPhone X Without Face Id?

Depending on the model of the Apple TV, you may be able to recharge your remote by plugging it into a USB port. If it is a second or third generation model, you can also use the included wall charger.

How Do I Open the Back of My Apple TV Remote?

If you are having problems with your Apple TV remote, you might want to replace the battery. When the battery is drained, it will stop working. It is easy to change the battery. You can find the battery you need in most stores.

First-generation Apple remotes are made of aluminum and have a glass touch surface. They have a directional pad, round navigation button, and play/pause button. These remotes use an IR transmitter to connect with Apple TV.

Second-generation remotes are grey. They contain a CR2032 battery. They have a small hole at the bottom. A paper clip can be used to open the battery compartment.

Third-generation remotes are also gray. They contain a coin slot at the bottom. An Apple charging cable plugs into the base of the remote.

The old skool Apple Remote is white. It has a battery compartment on the back of the remote. To open the battery, use a paper clip or a blunt object.

Rechargeable batteries are available online. Some electronic stores carry special lithium coin style batteries. Make sure the new battery is positive side up.

How Do I Charge My Apple TV Remote Battery?

If you have an Apple TV, you may want to know how to charge your remote battery. If you don’t, your remote might not work well with your Apple TV. The good news is that you can easily check the battery’s charge level with just a few simple steps.

First, you will need to go to your TV’s Settings menu and select Remotes and Devices. This will bring up a small bar at the bottom of the screen, showing you the firmware version and the charge percentage.

To charge the remote, you will need a charging cable or wall outlet adapter. Plug one end of the cable into the power outlet, and the other into the base of the remote. Once you have the cable in place, you can remove the old battery and insert the new one.

To fully charge the remote, you will need to charge it for two to 2.5 hours. Depending on the level of discharge, the time it takes to charge it may be a bit longer.

READ ALSO:  How Do I Connect Peacock to Apple TV?

How Do I Know My Apple TV Remote is Charging?

There are several ways to check whether your Apple TV remote is charging. The first way is by checking the status in the Settings app. This will show you the percentage of charge left on the remote and the current battery level.

If you aren’t sure about your battery’s charge, you can also check by pressing the home button on the remote. Usually, this will cause a green charging light to appear.

Another option is to use the Siri feature. You can check the battery level of your Apple TV remote with Siri. However, you will need to connect your remote to a USB port or a wall adapter. In the Siri Settings app, you will see a dedicated section for the remote.

Checking the battery on your Apple TV remote can help you determine the cause of your problem. Your remote may be having trouble pairing with your TV, or it could have a dead battery. Using the Siri feature is a quick and easy way to find out.

When you see that your remote’s battery is running low, you can charge it up. You can do this by plugging it into a wall outlet, a USB port, or a wireless charger. Depending on your model, you can also charge it with a Lightning cable.

How Do I Remove the Battery From My Apple Remote?

If your Apple TV remote isn’t working right, or if you just need to replace the battery, there are a few easy steps to get it working again. First, you’ll need to remove the old battery from the battery compartment. Then you’ll need to insert the new battery.

If your Apple TV remote has a lithium 3V coin battery, it’s simple to change. You can buy the batteries at most drug stores or electronics retailers. Just make sure you’re buying the correct type.

To replace the battery, you’ll need to open the back compartment of the remote. Depending on the remote model you have, you’ll need a coin or a paper clip to do this. Alternatively, you can use a pair of tweezers or a spoon.

After you’ve gotten the old battery out of the battery compartment, you’ll need to insert the new one. Make sure the positive side of the battery is facing up.

Once the new battery is in place, you can charge your Apple remote. This will take around 30 minutes, but should last for a couple months.

READ ALSO:  How to Watch Trutv on Apple TV?

How Do I Use Apple TV with Dead Remote?

If your remote is dead, you can do one of three things. Either get a replacement, use a different remote, or unplug the device.

The first thing you want to do is make sure you have a working remote. The Apple TV will not respond to keypresses if the remote is not properly connected.

Make sure you have a valid and authentic Apple certified cable. Knockoff cables may not charge the remote and could damage it. Also, make sure you are using the correct HDMI port. This should be the same port as your television.

In addition to the cable, you will need a CR2032 battery. A remote with a replaceable battery will be able to last you for months.

A dead Apple TV remote can be repaired by opening up the remote’s battery compartment and replacing the battery. You can also check the battery’s life by recharging it overnight.

While you are at it, you can also unplug the HDMI cable. That will help you fix the switch and light problems.

How Do You Open the Back of a Remote Control?

When you need to replace the battery in your Apple TV remote control, you’ll find that it’s very simple to do. But you’ll also need to be careful to get it right. If you don’t, your remote could end up damaged.

Before attempting to open the back of an Apple TV remote control, make sure you are prepared. Depending on the model you have, you may need to use different objects to get it open. For example, a thin pair of tweezers or a paper clip can be used. Another option is a sewing needle.

In addition to opening the remote, you’ll need to remove the battery. The battery compartment is located on the back side of the device.

First, you’ll need to open the compartment. This can be done with a blunt object such as a needle or a small coin. You can also use a small key to unlock the compartment.

Next, you’ll need to slide out the battery and circuitry. Be careful not to knock any of the circuitry off.

Learn More Here:

1.) Apple TV Website

2.) Apple TV Support

3.) Apple TV – Wikipedia

4.) Apple TV Guide